Installation; Preparation Of The Hood For Installation - Elica LIB0098383 Guide D'utilisation, D'entretien Et D'installation

Installation

Preparation of the hood for installation:

To facilitate the installation it is recommended to remove the
panel before installing the hood.
Attention! Keep both hands on the panel when
disassembling or reassembling it into place to prevent
it from falling and causing damage to persons or
property.
Disassembly:
- Pull the panel (FRONT SIDE) firmly down,
- Push the small lever, located in the right side of the panel,
to the left,
- Unhook it from the rear joints.
8