Operation; Troubleshooting; Restoration; Maintenance - GOK GWS 904 Instructions De Montage Et De D'utilisation

Indoor assembly

OPERATION

1. Using the connector, connect the limit indicator to the male contact of the overfill
prevention mechanism of the road tanker.
2. Fill the tank upon approval.
3. Upon completion of filling, fit back the cap of the connector.

TROUBLESHOOTING

Fault signal
Road tanker does not
provide approval.

RESTORATION

If the actions described in TROUBLESHOOTING do not lead to a proper restart and if there is
no dimensioning problem, the product must be sent to the manufacturer to be checked. Our
warranty does not apply in cases of unauthorised interference.

MAINTENANCE

Malfunctions and contamination of the PTC thermistor in the cover due to
contaminated operating media.
Proper operation is no longer provided for.
Remove the limit indicator from the tank!
Perform a visual inspection  sensor must be free!
Carefully clean the inside of the cover with a brush and cleaning agent.
Install the limit indicator into the tank and repeat CONTROL.
20 / 24
Limit indicator GWG - type GWS -issue 2
Action
 Check connector.
 Check cable or replace the limit indicator.
 MAINTAIN the sensor.
Connector
Cable
Filler line
Filling hole plug
Cable tie
Introduction liquid-proof
Feedthrough
Protective pipe
Part No. 15 382 65