Clear Calibration - Simple Option; Clear Calibration - Advanced Option - AgraTronix MT-PRO Manuel De L'opérateur

Masquer les pouces Voir aussi pour MT-PRO:

Table des Matières

Les langues disponibles

CLEaR CaLIBRaTION – SIMPLE OPTION

1. Select grain to clear.

2. Press CAL button (A), tester will then

display last calibration that was made.

3. Press CLEAR button (B).

4. Tester will then display 0.0% for

both lines if the calibration has

been cleared.

NOTE: If you press the CAL button

and tester displays 0.0% on both

lines, then no calibration has been

made for this grain.

CLEaR CaLIBRaTION –

advaNCEd OPTION

1. Select grain to clear.

2. Press CAL Button (A), tester will

then display last calibration that

was made.

3. Press CLEAR Button (B).

4. Tester will then display 0.0%

for both lines if the calibration

has been cleared.

NOTE: If you hit the CAL

Button and tester displays

0.0% on both lines, then no

calibration has been made

for this grain.

Operation

05-12

Table des Matières

Chapitres

Table des Matières