Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
AXIS conversion kit
09.
Problems when closing sliders
This chapter is only needed if sliders cannot be closed during calibration.
Risk of injury due to externally operated components
The metering slide is externally operated; there is a risk of shearing
and crushing.
Risk of losing limbs!
09.1. Disconnect the QUANTRON-A
from the voltage supply.
► Remove the ignition key of the tractor.
► Disconnect the control unit from the voltage supply.
► Disconnect the actuators from the control unit.
► Keep the protective grid closed.
► Keep sufficient distance from all moving machine
components.
► Observe the operating manual of the machine, particularly
the chapter "safety"!
Page 31 / 44
n DANGER
Publicité
Table des Matières
