AXIS conversion kit
02.
Before starting
Risk of crushing and shearing if the mineral fertiliser spreader is
uncoupled
If the return spring is tensioned when the set screw is loosened
(actuators K and R), the stop lever may hit the end of the guide slot.
There is a risk of crushing, shearing and other injuries.
► Always park the machine with the metering slide completely
► Never put your fingers in the guide slots of the application rate
02.1. Stop the machine in accordance
with the instruction manual and
disconnect it entirely from the
tractor, the hydraulic unit and the
control unit.
02.2. Switch off the tractor engine and
remove the ignition key.
n WARNING
open (return spring is released).
adjustment unit.
Page 3 / 44