Rauch AXIS QUANTRON-A Mode D'emploi page 67

AXIS conversion kit
06. Installing the cable ducts
06.1. Place the cables in the cable duct.
The distance between the cable
duct and the switch box must be
18 cm.
06.2. Place the machine cable and the
connection cables for the
TELIMAT and level sensor.
Place one cable for the TELIMAT
and level sensor to the left and
right side each.
Place the machine cable to the
left.
Legend
a) Machine cable
b) 3 x 4.7 x 380 cable ties
c) Level sensor
d) TELIMAT sensor
06.3. Place the cables for the actuator in
a cross-wise pattern.
Right cable "R" to the left.
Left cable "L" to the right.
The cable duct will be turned
around during subsequent
installation.
b
a b
c
d
"R"
Page 17 / 44
b
c
d
"L"