Rauch AXIS QUANTRON-A Mode D'emploi page 51

Masquer les pouces Voir aussi pour AXIS QUANTRON-A:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

AXIS conversion kit
01. Safety
Switch off the machine before working on it
Incorrectly parked machines increase the risk of accidents during
installation.
► Completely empty the machine!
► Park the machine according to the operating manual!
► Switch the tractor engine off and remove the ignition key!
► Completely disconnect the machine from the tractor, the hydraulic unit
and the control unit!
The following applies to all work on the machine:
Improper installation compromises the operational safety of the machine.
► For this reason, only trained personnel working with safety gloves may
carry out the installation!
► Observe the instruction manual of the machine! Particularly the chapter
"safety".
If the machine is connected to the tractor, the hydraulic unit or
QUANTRON:
This may be the case during setting and calibration of QUANTRON.
If the machine is connected to the tractor, the hydraulic unit or
QUANTRON, externally controlled components may start up unexpectedly.
There is a risk of body parts being cut off.
► Never touch externally controlled components.
► Keep the protective grid on the machine closed!
► Never work directly on the machine.
Page 1 / 44

Publicité

Table des Matières
loading

Table des Matières