Installation Instruction - CONFORAMA SABA LVS14C44MI18W Mode D'emploi

• Remove the Plug
Before cleaning or performing maintenance, always remove the
plug from the socket.
• No Solvents or Abrasive Cleaning
To clean the exterior and rubber parts of the dishwasher, do not
use solvents or abrasive cleaning products. Only use a cloth with
warm soapy water. To remove spots or stains from the surface of
the interior, use a cloth dampened with water an a little vinegar,
or a cleaning product made specifically for dishwashers.
• When not in Use for a LongTime
GB
It is recommend that you run a wash cycle with the dishwasher
empty and then remove the plug from the socket, turn off the
water supply and leave the door of the appliance slightly open.
This will help the door seals to last longer and prevent odours
from forming within the appliance.
• Moving the Appliance
If the appliance must be moved, try to keep it in the vertical
position. If absolutely necessary, it can be positioned on its back.
• Seals
One of the factors that cause odours to form in the dishwasher is
food that remains trapped in the seals. Periodic cleaning with a
damp sponge will prevent this from occurring.
105

8. Installation instruction

Positioning the Appliance
Position the appliance in the desired location. The back should
rest against the wall behind it, and the sides, along the adjacent
cabinets or walls. The dishwasher is equipped with water supply
and drain hoses that can be positioned either to the right or the
left sides to facilitate proper installation.
Levelling the Appliance
Once the appliance is positioned for
levelling, the height of the dishwasher
may be altered via adjustment of the
screwing level of the feet.
About Power Connection
WARNING!
For personal safety:
• Do not use an extension cord or an adapter plug with this
appliance.
• Do not, under any circumstances, cut or remove the earthing
• Connection from the power cord.
GB
106