CONFORAMA SABA LVS14C44MI18W Mode D'emploi page 50

Program Cycle Selection
Information
Rapid A shorter wash for
lightly soiled loads
that do not need
drying.
Soak To rinse dishes that
you plan to wash
later that day
GB
Running
time (min)
Intensive 175
Normal 185
ECO 195
90 min 90
Rapid 30
Soak 15
95
Description Detergent
of Cycle pre/main
Wash (45°C) 25g
Rinse (50°C)
Rinse (55°C)
Prewash
Energy Water Rinse Aid
(Kwh) (L)
1.6 17.5
1.30 13.5
0.93 10
1.35 12.5
0.75 11
0.02 4
NOTE:
*EN 50242 : This program is the test cycle.
The information for comparability test in accordance with
EN 50242, as follows:
• Capacity: 14 setting
• Position Upper basket: upper wheels on rails
• Rinse aid setting: 6
• PI: 0.49W; Po: 0.45W.
Left-on mode duration: Power will be cut off automatically
after program finished for 30 minutes.
Turning On the Appliance
Starting a cycle wash
1. Draw out the lower and upper basket, load the dishes and
push them back. It is commended to load the lower basket
first, then the upper one (see the section entitled "Loading the
Dishwasher").
2. Pour in the detergent (see the section entitled "Salt, Detergent
and Rinse Aid").
3. Insert the plug into the socket. The power supply is 220-
240VAC / 50HZ, the specification of the socket is 10A 250VAC.
Make sure that the water supply is turned on to full pressure.
4. Press the program button, the wash program will be changed
as follows direction:
Intensive->Normal
90min->Rapid->Soak
5. If a program is selected, the response light will light.
Then press the Start/Pause button, the dishwasher
begins to start.
GB
->ECO->
96