WARNING!
• The dishwasher must never be used without the filters.
• Improper replacement of the filter may reduce the
performance level of the appliance and damage dishes and
utensils.
Open
GB
NOTE:
When following this procedure from step 1 to step 2, the filter
system will be removed; when following it from Step 2 to Step 1,
the filter system will be installed.
Remarks:
• Inspect the filters for blocking after every time the dishwasher
has been used.
101
Step 1: Turn the filter in anti-
clockwise direction
Step 2: lift the filter assy up
• By unscrewing the coarse filter, you can remove the filter
system. Remove any food remnants and clean the filters under
running water.
NOTE:
The entire filter assembly should be cleaned once a week.
Cleaning the Filter
To clean the coarse filter and the fine filter, use a cleaning brush.
Reassemble the filter parts as shown in the figures on the
last page and reinsert the entire assembly in the dishwasher,
positioning it in its seat and pressing downwards.
WARNING!
When cleaning the filters, don't knock on them. Otherwise, the
filters could be contorted and the performance of the dishwasher
could be decreased.
Caring for the Dishwasher
The control panel can be cleaned by using a lightly dampened
cloth.
After cleaning, make sure to dry it thoroughly.
For the exterior, use a good appliance polish wax.
Never use sharp objects, scouring pads or harsh cleaners on any
part of the dishwasher.
GB
102