Prior Using For The First Time; Water Softener; Adjusting Salt Consumption - CONFORAMA SABA LVS14C44MI18W Mode D'emploi

Dishwasher Features
Front View
1
2
3
4
5
GB
1.
Upper Basket
2.
Inner pipe
3.
Lower Basket
4.
Salt Container
5.
Dispenser
75
Back View
6
7
8
9
6.
Cup Shelf
7.
Spray arms
8.
Filter assembly
9.
Inlet pipe connector
10.
Drain pipe

4. Prior using for the first time

Before using your dishwasher for the first time:
A. Set the water softener
B. Add 1.5Kg dishwasher salt and then full fill the salt container
with water
C. Fill the rinse aid dispenser
D. Fill in detergent
A. Water Softener
10
The water softener must be set manually, using the water
hardness dial.
The water softener is designed to remove minerals and salts from
the water, which would have a detrimental or adverse effect on
the operation of the appliance.
The higher the content of these minerals and salts, the harder
your water is.
The softener should be adjusted according to the hardness of the
water in your area. Your local Water Authority can advise you on
the hardness of the water in your area.

Adjusting Salt Consumption

The dishwasher is designed to allow for adjustment in the
amount of salt consumed based on the hardness of the water
used. This is intended to optimise and customise the level of salt
consumption.
Please follow the steps below for adjustment in salt consumption.
GB
76