Moving The Appliance; Installation Instruction; Positioning The Appliance; About Power Connection - CONFORAMA SABA LV10C44MINI-PLIX Mode D'emploi

To remove spots or stains from the surface of the interior, use
a cloth dampened with water an a little vinegar, or a cleaning
product made specifically for dishwashers.
• When not in Use for a Long Time
It is recommend that you run a wash cycle with the dishwasher
empty and then remove the plug from the socket, turn off the
water supply and leave the door of the appliance slightly open.
This will help the door seals to last longer and prevent odours
from forming within the appliance.
•

Moving the Appliance

GB
If the appliance must be moved, try to keep it in the vertical posi-
tion. If absolutely necessary, it can be positioned on its back.
• Seals
One of the factors that cause odours to form in the dishwasher is
food that remains trapped in the seals. Periodic cleaning with a
damp sponge will prevent this from occurring.
102

8. Installation instruction

Positioning the Appliance

Position the appliance in the desired location. The back should
rest against the wall behind it, and the sides, along the adjacent
cabinets or walls. The dishwasher is equipped with water supply
and drain hoses that can be positioned either to the right or the
left sides to facilitate proper installation.
Levelling the Appliance
Once the appliance is positioned for level-
ling, the height of the dishwasher may be
altered via adjustment of the screwing level
of the feet.

About Power Connection

WARNING!
For personal safety:
• Do not use an extension cord or an adapter plug with this
appliance.
• Do not, under any circumstances, cut or remove the earth-
ing connection from the power cord.
Electrical Requirements
Please look at the rating label to know the rating voltage and
connect the dishwasher to the appropriate power supply. Use the
required fuse 10 amp, time delay fuse or circuit breaker recom-
mended and provide separate circuit serving only this appliance.
GB
103