Fein ASCM18QM Serie Mode D'emploi page 19

Translation of the Original Instructions. en
Symbols, abbreviations and terms used.
Symbol, character
WARNING
s
3. 4.
Fe
Explanation
Do not touch the rotating parts of the power tool.
Make sure to read the enclosed documents such as the Instruction Manual and the
General Safety Instructions.
Observe the instructions in the text or graphic opposite!
Before commencing this working step, remove the battery from the power tool. Oth-
erwise there may be danger of injury caused by unintentional starting of the power
tool.
Use eye protection during operation.
Use ear protection during operation.
Use protective gloves during operation.
Do not charge damaged batteries.
Keep the battery away from fire. Protect the battery against heat, e. g. against contin-
uous intense sunlight.
Observe the information in the adjacent text!
Additional information.
Gripping surface
Switching on
Switching off
Confirms the conformity of the power tool with the directives of the European Com-
munity.
Confirms the conformity of the power tool with the directives of Great Britain (Eng-
land, Wales, Scotland).
This symbol confirms the certification of this product for the USA and Canada.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
Recycling symbol: designates recyclable materials
Worn out power tools and other electrotechnical and electrical products should be
sorted separately for environmental-friendly recycling.
Battery type
Charger type
1. gear/2. gear/3. gear/4. gear
Drilling diameter, steel
Drilling diameter, wood
en
19