CAPITAL SPORTS Challenger 10035102 Mode D'emploi page 76

EN
76
Display Description
CALORIES Displays runner's calories worked out. Calories display range
is 0.0 - 999. When the maximum calorie limit is reached, it
will not stop and count from 0.0 again. In calorie countdown
mode it will show from setting data to 0.0. When reach to
0.0, the window will show "END", after 5 seconds it will enter
into standby mode.
PULSE Displays current pulse. Hold the pulse sensors with both
hands for 5 seconds to calculate and display the runner's
heart beats per minute, the display range is 50 - 200 beats/
min (This data is just for reference, and cannot be used as
the medical data).
INCLINE Displays current incline levels. Incline mode display range is
-1 - 15. Run mode display range is -1 - 40 in CLIMB mode.
SPEED Displays current speed. Speed range is 0.8 - 18 km/h in RUN
mode and 0.8 - 6 km/h in CLIMB mode.
STEPS Displays running steps, the display range is 0 - 99999. In
CLIMB mode, this function will be shut off.
Middle LCD Displays TIME, DISTANCE, SPEED, CALORIES and PULSE in
window turns with pressing DISPLAY-ALT button. Displays "FAT" in
FAT mode.
Button functions
Display Description
START Press this button at any time when the power plug is
plugged into the outlet and the safety key has been attached
to start the treadmill.
STOP When running, press STOP button the machine will stop and
all date recover to initial setting.
MODE Press this button in standby mode to choose running
mode. Includes time countdown mode "30:00", distance
countdown mode "1.00", calorie countdown mode "50.0",
step countdown mode "5000". The window will flash all
the time when you choose the function. Press -SPEED+ or
-INCLINE+ button to set the data and press START button
to start running.
PROGRAM Press this button to choose a suitable program.
The programs are: P1 (MANUAL), P2 (INTERVAL), P3 (LOSE
WEIGHT), P4 (WALK), P5 , P6, P7, P8, P9, P10, P11, P12 and
FAT. In CLIMB mode you can choose P1-P6.