Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V 4.0
temperatures. Fuel problems may occur in a few months or sooner if the
gasoline was not fresh when the tank was filled.
Adding a gasoline stabilizer that is formulated for this purpose can extend fuel
storage life. Deterioration problems can also be avoided by draining the fuel
tank and carburetor prior to storage.
ADDING A GASOLINE STABILIZER
1.
Fill the fuel tank with fresh gasoline.
2.
Add gasoline stabilizer. Ensure that the instructions for that product are
followed.
3.
Run the engine outdoors for 10 minutes to ensure that treated gasoline
has replaced the untreated gasoline in the carburetor.
4.
Stop the engine.
REMOVAL FROM STORAGE
1.
Check the engine as described in the section Operation - Before Starting
the Engine.
2.
Fill the tank with fresh gasoline if the fuel was drained during storage
preparation.
a.
Ensure that it contains fresh gasoline if you keep a container of
gasoline for refuelling,
b.
Gasoline will oxidize and deteriorate over time, causing hard starting
(see Fuel).
3.
An engine cylinder coated with oil during storage preparation will smoke
briefly at start up. This is normal.
TRANSPORTING THE ENGINE
WARNING! Transport the engine with an empty fuel tank or with the fuel valve
secured in the OFF position.
1.
Keep the engine level when transporting to reduce the possibility of fuel
leakage.
a.
Remove fuel and oil if possible. Refill at the destination.
2.
Turn the fuel valve to the OFF position.
3.
Cover to prevent contamination from weather or road conditions.
4.
Consult the user manual of the piece of equipment this engine is mounted
on for transportation instructions.
Visit www.princessauto.com for more information
7 HP 212cc OHV Gas Engine with Electric Start
8913188
21
Publicité
Table des Matières
