Functional Description; Contents - VOLTCRAFT LSP-1403 Notice D'emploi

Functional description

The laboratory power supply works with highly developed combinational circuit technology and active
PFC (power factor correction). This ensures a stable output voltage and a high degree of effectiveness.
The DC output is electrically isolated and features a protective isolation towards the mains voltage. The
secondary DC connection is realised via two coloured safety sockets on the front and via plug-in clamps
on the rear. Both outputs are directly connected to each other.
The concise dual displays show the voltage and current (V = Volt = unit of electric voltage, A = Ampere =
unit of electric current). Via light displays the current condition of the power supply is indicated. Various
protective mechanisms, e.g. overload protection, current limitation, overheating protection, etc. are built
in for secure and reliable operation.
The power supply unit is cooled through convection. Therefore, ensure sufficient air circulation.
Output voltage and output current can be adjusted continuously.

Contents

Laboratory power unit
Power cable
Operating instructions
23