Publicité
FINAL ASSEMBLY
1A. Mount the doors by pinching the end of the hinge as shown.
1B. If the installation requires, attach the provided hinge clips [SS666] over the elbow of the hinges to stop door swing radius at 110°.
1A
1A
NOTE: The door hinges have a three-way adjustment feature. These adjustments can be made using a #2 Phillips Head screwdriver.
2A. With the hinge slightly closed, you can access the middle screw. This screw will move your door front up and down, adjusting the
height.
2B. With the hinge fully extended, you can access the front and back screws. The front screw will adjust the door front from side to side.
The rear screw will adjust the door in and out.
2A
2B
© 2020 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation instructions
1B
15
Part no. CB-209-1332 05/05/20
Vitality Cabinet
Publicité
Chapitres
