Publicité
RECESS MOUNTING
3. Place cabinet in rough-in and make sure cabinet is plumb and level.
4. Install a #10 X 2" screw [SS674] through top mounting hole in cabinet side and screw into wall stud as shown. Do not over tighten
screw.
5. Once cabinet is plumb and level, install #10 X 2" screws into wall studs through the three remaining mounting holes. Do not over
tighten screws.
Proceed to page 15 for Final Assembly steps.
3
5
4
[SS674]
#10 x 2" Screw
Part no. CB-209-1332 05/05/20
Vitality Cabinet
© 2020 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
11
Installation instructions
Publicité
Chapitres
