Publicité
OPTION 1 - ELECTRIC CONNECTIONS
1. Remove the access screws from each plate located on the back of the cabinet. Remove rear plates to access internal wiring.
NOTE: Wiring access opening closest to hinge side of cabinet contains dimmer/switch connections.
2. Carefully cut plastic tie before making the connections.
3. Feed the electric wire through the access hole in the plate as shown.
4. Make all electrical connections as referenced in the electrical diagram on page 6.
5. Reinstall rear access plate.
1
5
© 2020 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation instructions
2
8
3
102 mm MAX
Part no. CB-209-1332 05/05/20
4" MAX
Vitality Cabinet
Publicité
Chapitres
