Publicité
SURFACE MOUNTING
6. Slide three Top Clips [SS712] into the screw channel at the top of the cabinet.
NOTE! Top Clips MUST be inserted into the channel.
7. Lift the cabinet and place the cabinet onto the Z mounting bar.
8. Using the provided #10 X 2" screws [SS674], attach the top of the cabinet to the wall through the top clips as shown.
NOTE! If no stud is available, use wall anchors as described in step 5b.
9. Electrical field wiring: See page 6 for electric connection diagram. See Page 7 for electrical connection options.
10. Attach Side Kits (included with optional Surface Mount Kit) to cabinet, using provided SS676 screws, from cabinet box interior into
Side Kit mounting brackets.
Proceed to page 15 for Final Assembly steps.
6
3x
9
OR
© 2020 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation instructions
7
10
8-[SS676]
8-[SS672]
14
8
#10 x 2" Screw
Part no. CB-209-1332 05/05/20
[SS674]
Vitality Cabinet
Publicité
Chapitres
