Publicité
FINAL ASSEMBLY
3. Insert clear snap-in Shelf Clips [SS131] into the holes on the sides of the cabinet.
4. Push one side of the shelf into the left or right clip. Snap the shelf down into the opposite side. If the shelf is too tight, repeat the
process starting from the opposite side.
5. Press the hole plugs [SS134] into the unused holes inside the cabinet. Place the Screw Caps [SS672] over any exposed screw
heads.
NOTE: Do not store items in the cabinet area directly behind the hinge, as damage may occur to cabinet or items.
3
[SS131]
(12)
[SS131]
USE AND MAINTENANCE
CAUTION: Maximum shelf load 34 LBS
The cabinet door and interior are constructed of mirrored glass and aluminum. Use only a damp cloth to clean. Ammonia or vinegar-
based cleaners can damage mirrors.
A 50/50 solution of water and isopropyl alcohol is recommended for cleaning the mirrors. A mild detergent may be used on the surfaces.
When cleaning, spray the cloth, not the cabinet, mirror, or surround surfaces. Do not use abrasive cleansers on any part of the light
fixture.
© 2020 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation instructions
4
No Ammonia
No Vinegar
16
5
[SS134]
[SS672]
No Ammonia
Sans Ammoniac
Sin Amoniaco
No Vinegar
Sans Vinaigre
Sin Vinagre
Part no. CB-209-1332 05/05/20
Vitality Cabinet
Publicité
Chapitres
