Li-Ion Battery; Electrical Safety - Elem Garden Technic TH3.6V-2IN1 Traduction Des Instructions D'origine

USE
Charging the battery (Fig 2)
(charger not supplied)
The USB charger supplied with the device is
suitable for the built-in lithium ion battery in
TH3.6V-2IN1. Do not use another charger.
When the battery is discharged, the device is
stopped by a protective shutdown device: The
blade stops moving and a slight hissing noise is
heard.
• Connect the USB charger cable to the machine
and connect it to the USB connection of your
computer or a charger (not supplied).
• Check that your mains voltage of your charging
stand is the same as that indicated on the rating
plate of your machine.
Plug the USB charger cable into the machine.
The red LED (Figure 2 / Item 1) illuminates to
indicate that the charging voltage is available.
• As soon as the battery is fully charged, the red
LED (Fig. 2 / Item 1) goes out
If the rechargeable battery does not charge,
check to see if there is voltage to your charging
cradle.
A quick recharge of the battery will help you serve
you well for a long time. Refilling is always
necessary when you notice a drop in the
performance of the tool.
Never allow the battery to discharge completely.
This will cause him to develop a defect.

- LI-ION BATTERY

Advantages of Li-ion batteries :
- Li-ion batteries have a higher capacity/weight
ratio (more power for less heavy, more
compact, battery)
- No memory effect (capacity loss after several
charge/discharge cycles) like other type batteries.
(Ni-Cd, Ni-MeH ..) .
- Limited self discharge.
Charge battery pack solely with
WARNING: Packaging materials
are not toys! Children must not
play with plastic bags! Danger
START-UP
The area to be cut must first be cleared of stones
and other solid objects. The safety interlock (Fig.
1 / Item 3) prevents unintentional starting of the
tool. To start the tool, turn on the safety lock
(Figure 1 / Item 3) by pushing it forward and
pressing the ON / OFF switch (Figure 1 Item 4) at
the same time.
To turn off the tool, release the ON / OFF switch
(Figure 1 / Item 4).

ELECTRICAL SAFETY

Check whether the voltage
indicated on the type plate of
the charger corresponds to the
29
the charger provided !
of suffocation!
mains voltage.