Setting The Clock Format - Sangean DDR-36 Mode D'emploi

Setting the clock format

The display used in standby mode and when the radio is in use can be set to  or 4 hour
format. The selected format is then also used when setting the alarms.
. Press the Standby button to switch on your radio.
. Press and release the Menu button until the Advanced menu shows on the display.
. Rotate the Tuning control until 'System Setting' appears on the display. Press and release the
Select button.
4. Rotate the Tuning control until 'Time' appears on the display. Press and release the Select button.
5. Rotate the Tuning control until 'Time /4 hour' appears on the display. Press and release the
Select button.
6. Rotate the Tuning control to select either  or 4 hour format. The current hour format will be
marked with an asterisk. Press and release the Select button.
If the  hour clock format is chosen, the radio will then use the  hour clock for setting of
alarms, and will display a  hour clock with an AM or PM indicator when in standby mode.
DAB
<System Setting
System Setting
<Time
Set 12/24 hour
<Set 12 hour
Set 12/24 hour
<Set 24 hour
GB
>
>
>
*
>