Stereo / Mono Setting - Fm - Sangean DDR-36 Mode D'emploi

Stereo / Mono setting - FM

Your radio will play stereo FM broadcasts in stereo provided that the received signal is of
adequate strength. However, as a stereo signal becomes weaker the audio signal will become
poorer. It may be preferable to force the radio to play the station in mono in order to reduce the
level of background hiss.
. Press the Standby button to switch on your radio.
. Tune to the required FM radio station as previously described.
. Press and release the Menu button until the Advanced FM menu shows on the display.
4. Rotate the Tuning controls until 'FM Audio' appears on the display. Press and release the
Select button.
5. To switch to mono to reduce the hiss from a weak FM signal rotate the Tuning control until
'Mono' appears on the display. Press and release the Select button to confirm the setting. The
current audio setting will be marked with an asterisk.
6. Alternatively to return to stereo rotate the Tuning control until 'Auto' appears on the display.
Press and release the Select button to confirm the setting.
7
FM
<FM Aud
FM Audio
<Mono
FM Audio
<Auto
>
*
>
>