Presetting Stations-Dab/ Fm - Sangean DDR-36 Mode D'emploi

Presetting stations - DAB and FM
You may store your preferred DAB and FM radio stations to the preset station memories. There
are 0 memory presets in your radio 0 for DAB and 0 for FM. Presets are remembered by your
radio in the event of a power failure.
The procedure for setting presets and using them to tune stations is the same for FM and DAB
modes, and is described below.
. Press the Standby button to switch on the radio.
. Press the Mode button to select the DAB or FM waveband.
. Tune to the required station as previously described.
4. Press and hold the Preset button until the display shows 'Preset store.'
5. Rotate the Tuning control to select your desired preset number. Press the Select button to store
the currently tune station. The display will show, for example 'Preset  stored.' Repeat this
procedure for the remaining presets.
Note:
Stations stored in preset memories may be overwritten by following the above procedure.
9
Preset 1
stored