Clock Operation - Sangean WFT-10 Plus Mode D'emploi

Preset
Preset allows you to store the most frequent listened stations that
you can select those stations easily and quickly. You can preset up to
10 stations for each Internet Radio, FM and Digital Radio (DAB plus).
To store a preset:
1. Turn to the required band (Internet Radio, FM or Digital Radio
(DAB plus)) and station.
2. Press and hold the required preset button (1 to 10) on the remote
control until the display shows "Preset stored". The station will be
stored in the chosen preset. Repeat this for the remaining presets
if needed.
There is another option for FM mode:
1. Press the Preset button and the LCD will show "Save to preset" list.
2. Rotate the Tuning knob to select which preset number you would like
to save, and press the Tuning knob to save the preset.
To recall a preset:
1. Enter the required band (Internet Radio, FM or Digital Radio
DAB plus)).
2. Press the required preset button (1 to 10) and your remote control
will then to the station stored in the preset memory. Or press the
STOP/PRESET button and use TUNING KNOB to select and recall
the preset.
37

Clock Operation

The radio must have the clock / date set to use the alarm functionality.
Clock/Date Setup
1. To setup the time go to > System settings > Time/Date >
Set Time/Date.
2. Use TUNE+/TUNE- or Turning knob to adjust the values and use
FORWARD/BACK to move back and forth between fields. Press the
Turning knob or the button to move back and forth between fields
or confirm.
Time Zone Setup
To setup the time go to > System settings > Time/Date >
Set timezone. Then select the time zone.
DST (Daylight Savings Time setup)
To setup the daylight saving time (1 hour ahead) go to >
System settings > Time/Date > Daylight savings. And then select
ON or OFF for the daylight savings.
Time/Date Auto Update
Auto update menu allows the user to select whether or not the
time/Date is to be synchronized with the Internet.
To setup the auto update go to > System settings > Time/Date >
Auto update and choose the source of the update.