Headphone Socket; Auxiliary Input Socket; Line Out Socket - Sangean DDR-36 Mode D'emploi

Headphone socket

A .5mm Headphone socket located on the rear of your radio is provided for use with
headphones. Inserting a plug automatically mutes the internal loudspeaker.
Please be aware that the sensitivity of headphones can vary widely. We therefore recommend
setting the volume to a low level before connecting headphones to the radio.
IMPORTANT:
Excessive sound pressure from earphones and headphones can cause hearing loss.
Line out socket (3.5mm Jack)
A .5mm Line Out socket located on the rear of your radio is provided for connecting the audio
signal to an external amplifier. Inserting an audio cable into this socket will not mute the internal
loudspeaker. Set the volume control on the radio to minimum if desired.

Auxiliary input socket

A .5mm Auxiliary input socket is provided on the rear of your radio to permit an audio signal to
be fed into the unit from an external audio device such as an iPod, MP or CD player.
. Connect a stereo or mono audio source (for example, iPod, MP or CD player) to the Auxiliary
input socket (marked 'Aux In').
. Press the Standby button to switch on your radio. The display will show 'Auxiliary Input'.
. Adjust the Volume control on your iPod, MP or CD player to ensure an adequate signal and
then adjust the volume on the radio for comfortable listening.
GB
40