Dyson 360 Heurist Mode D'emploi page 8

Starting a clean
Plug
Cable
Dock
1
Setting up
Open the dock fully to
90° and place it against
the wall.
Plug the charging cable
into either side of the
dock.
Ensure that the dock is
powered, indicated by a
blue light on the dock.
Tidy any surplus cord by
wrapping it around the
plug.
Ensure that no objects are
within approximately a
50cm radius of the dock.
8
08.11.2018 10:25 - C91389_RB02_OPMAN_CA_X276-OPMAN-91389.indd_15_4c0s
'Power on' indicator
2
Charging
Place your robot on the
dock with the clear bin
facing the wall.
The battery light will
indicate that your robot
is charging.
No cables
Clear
edges
Clear floors
3
Preparing the
room
Remove thin rugs or
loose items that your
robot may suck up.
Tidy obstacles such
as shoe laces or thin
cords that may become
entangled in the brush
bar.
Clean any liquid spills
or sharp items that may
cause damage to your
robot.
Ensure that there are
no items such as bags
or shoes within 10cm of
any drops in the room.