Applications; Batteries, Safety And Power - Stanley FATMAX FMHT77356 Mode D'emploi

GB
User Manual

Applications

Plumb Transfer
• Using the vertical laser beam, establish a vertical
reference plane.
• Position the desired object(s) until they are aligned
with the vertical reference plane to ensure object(s)
are plumb.
Level Transfer
• Using the horizontal laser beam, establish
a horizontal reference plane.
• Position the desired object(s) until they are aligned
with the horizontal reference plane to ensure
object(s) are level.
Square
• Using the vertical and horizontal laser beams,
establish a point where the two beams cross.
• Position the desired object(s) until they are aligned
with both the vertical and horizontal laser beams to
ensure objects(s) are square.

Batteries, Safety and Power

WARNING:
Read all safety warnings and instructions
included in the accompanying Safety
Instructions and User Manuals before using
this product. Failure to follow the warnings and
instructions may result in electric shock, fire
and/or serious injury."The person responsible
for the instrument must ensure that all users
understand and adhere to these instructions.
• Prevent unintentional start up. Ensure the switch
is in the off-position before picking up or carrying
the device. Carrying the device with your finger
on the switch or energizing the unit with the
switch in the on position invites accidents.
6
• The laser should only be recharged with the
power supply provided by connecting it to
the DC power supply jack shown in Figure
A#4 (Power supply: Huntkey Model #
HKA03612030-8C) A charger that is suitable
for one type of product or battery pack may
create a risk of fire when used with another
product or battery pack.
• The laser comes with an integrated and
rechargeable Li-Ion battery pack which is not
user replaceable or serviceable. Do not attempt
to install any other battery packs as this may
create a risk of injury and fire.
• When device is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that
can make a connection from one terminal to
another. Shorting the battery terminals together
may cause burns or a fire. Ensure the DC power
supply jack is closed with the attached rubber
plug when not in use.
• Under abusive conditions, liquid may be ejected
from the integrated batteries; avoid contact. If
contact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical
help. Liquid ejected from the batteries may cause
irritation or burns.
• Do not use the device if damaged or modified.
Damaged or modified Li Ion battery powered
product may exhibit unpredictable behavior
resulting in fire, explosion or risk of injury.
• Do not expose a battery pack or appliance to
fire or excessive temperature. Exposure to fire
or temperature above 130°C (265°F) may cause
explosion. See recommended temperatures in
the Specifications Table.
• The laser product is not user serviceable and
should be returned to your distributor or Stanley
Warranty/Service Center in the event of failure
or damage. Any service applicable should be
performend by a qualified repair person using
only identical replacement parts. This will ensure
that the safety of the product is maintained.