Product Overview; User Safety; Applications - Stanley SLP1 Manuel De L'utilisateur

GB
Contents
• Safety

• Product Overview

• Applications

• Batteries and Power
• Set Up and Operation
• Calibration
• Specifi cations

User Safety

WARNING:
• Carefully read the Safety Instructions and
Product Manual before using this product.
The person responsible for the instrument must
ensure that all users understand and adhere to
these instructions.
CAUTION:
• While the laser tool is in operation, be careful
not to expose your eyes to the emitting laser
beam (red light source). Exposure to a laser
beam for an extended time may be hazardous
to your eyes.
CAUTION:
• Glasses may be supplied in some of the laser
tool kits. These are NOT certifi ed safety glasses.
These glasses are ONLY used to enhance the
visibility of the beam in brighter environments or
at greater distances from laser source.
Retain all sections of the manual for future reference.
WARNING:
• The following labels are placed on your laser tool
to inform of the laser class for your convenience
and safety. (Text has been translated here for
your convenience)
EN 60825-1
4
L A S E R R A D I AT I O N - D O N O T
S TA R E I N T O T H E B E A M O R V I E W
D I R E C T LY W I T H
O P T I C A L I N S T R U M E N T S
C L A S S 2 L A S E R P R O D U C T
Max Output ≤ 1 mW @ 630 - 670 nm
Product Overview
Figure A -
Laser Tool
1. Power ON / OFF
2. Bubble Vials (2x)
3. Window for Beam Laser
4. Cap for Laser Chalkline
5. Magnetic Base
6. Belt Clip
7. Battery Cover
Figure B -
Base Accessory
8. Key Hole Slot(s) for Wall Hanging
9. Degree Markers (1° / 45° / 120° Increments)
10. Laser Tool Cradle
11. Alignment Pin
12. 1/4-20 Threaded Mount
Figure C -
Laser Tool Battery Location
7. Battery Cover
13. Batteries - 2 x "AAA"
Figure D -
Applications
Applications
(See fi gure )
D
The laser tool is the perfect tool for all interior levelling
applications.
Laser Torpedo Level (See fi gure
• Compact, magnetic torpedo laser level
• Red beam laser pointer (beam center is offset 14mm
from bottom surface of laser tool)
Laser Chalkline (See fi gure
• Attach cap for Laser Chalkline
• Project straight lines down onto any fl at surface
• To generate level and plumb chalklines, reference and
center the approriate level vials
Laser Square / Protractor (See fi gure
• With use of the base accessory, the laser tool can be
used as a Laser Square
• With base, the laser tool can be rotated 360° (with 1°,
45°, and/or 120° degree markers)
)
D
1
)
D
2
and )
D D
3 4
77-152