Product Description - Rational iCombi Pro Installation

3 | Product description

CAUTION
Risk of crushing due to the weight of
the devices
Fingers, hands and feet may be trapped
under the devices.
Wear suitable protective clothing for
n
transport and setup.
Only setup the device in sequence.
n
Only lift the devices individually
n
onto the installation surface.
Use lifting aids such as lifting straps
n
from the manufacturer.
Note the center of gravity of the
n
relevant devices when lifting.
Only lift the devices via the
n
designated lifting points.
NOTE
Damage to the connections can occur
during movement
Disconnect all connections before
moving the Combi-Duo. Connect all
connections in accordance with the
specifications again once the work is
complete.
Align the stand or the leveling kit
horizontally before setting up the
Combi-Duo setup again.
Guide rollers: Apply the locking brake.
3 Product description
Combi-Duo versions: Electrical device as
the bottom device
The following Combi-Duo versions are
available:
80.51.373_iCombi Pro-iCombi Classic_CD E_IM_V02_US-nord
Bottom de- Top device
vice: Electri-
cal device
6 half size / 6 half size
10 half size electric/gas
electric
6 full size / 6 full size
10 full size electric/gas
electric
Information on other Combi-Duo ver-
sions, such as with gas devices as the bot-
tom device, is available in the relevant in-
stallation manuals.
Scope of delivery [
1 Base frame
3 Front panel
5 Insulation mat
left
7 Exhaust pipe
9 Ethernet cable
Dimensions
Note that the connection heights and in-
sert heights for both devices change with
the Combi-Duo setup. Drawings for the
setup and precise dimensions and height
of the topmost insert rail for the different
compositions can be found in separate di-
mensional drawings.
NOTE! If the insert height is over 1600
mm [63 inch], mount a safety label on the
device.
Legend for the dimensional drawings:
1 Top rack height
3 Rack loading
height - bottom
unit
en-US
Item number
60.73.991
60.74.725
Figure 01]
2 Insulation mat
right
4 Side panel
6 Heat shield /
guard cover for
exhaust pipe
8 Holder for ex-
haust pipe
2 Rack loading
height - top unit
4 Water drain
height - top unit
5 / 20