Philips HF3650 Mode D'emploi page 18

Masquer les pouces Voir aussi pour HF3650:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English
20
Problem
The FM radio
produces a crackling
sound.
The alarm went off
yesterday, but it did
not go off today.
I wanted to snooze,
but the alarm did not
go off again after 9
minutes.
The light wakes me
too early.
The light wakes me
too late.
I am unable to turn
the Midnight Light
on/off.
I am unable to stream
music via USB.
The aux inlet doesn't
work properly.
Solution
Check if your FM radio is correctly tuned to a radio station. If
necessary, adjust the frequency.
Change the position of the antenna by moving it around. Make sure
you have unwound the antenna completely.
Call 1-866-832-4361 for assistance.
Perhaps the broadcast signal is weak. Adjust the frequency (see
'Radio') and/or change the position of the antenna by moving it
around. Make sure you have unwound the antenna completely.
Perhaps you turned off the alarm function. The alarm icon is visible
on the display when the alarm function is active.
Perhaps you set a volume level and/or light intensity level that is too
low. Set a higher volume and/or light intensity level in your wake-up
profile (see 'Set wake-up profiles').
When there has been a power failure, the clock time will keep on
running up to 8 hours. Perhaps the power failure lasted longer. In this
case, you have to set the clock time again.
Tap on the top of the Sleep & Wake-Up Light to snooze. If you press
the button to dismiss the alarm (see 'Set wake-up profile'), the alarm
profile is deactivated for that day.
Perhaps the light intensity level you have set is not appropriate for
you. Try a lower light intensity level if you wake up too early. You can
also change the duration of the wake-up curve (see 'Set wake-up
profiles'). If light intensity 1 is not low enough, move the appliance
further away from the bed.
Perhaps the light intensity you have set is too low. Select a higher
light intensity (see 'Light intensity of the wake-up profile'). Perhaps
the appliance is positioned at a lower level than your head. Make
sure the appliance is located at a height at which the light is not
blocked by your bed, comforter, blanket or pillow. Also make sure the
appliance is not placed too far away.
Make sure you tap on the correct position (top/back) of the
appliance.
The USB connection is only for charging your mobile phone. You are
not able to stream music to the Sleep & Wake-Up Light.
Try to set the volume on your mobile phone either higher or lower. If
necessary, adjust the volume level on the appliance as well.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Hf3651

Table des Matières