Navigating The Menu; Setting Wake-Up Profiles - Philips HF3650 Mode D'emploi

Navigating the menu

Setting wake-up profiles

Light intensity of the wake-up profile
Duration of the wake-up profile
On the display you can select and set the wake-up profile, bedside light,
settings, sound (source) or the unwind program.
Note: All your personalized settings and profiles will be permanently
stored in the memory, they will not be erased by removing the adapter
from the electrical outlet. You can change all settings at any time, the last
setting will be stored.
Note: If the display is blank, move your hand towards the lower part of the
Sleep & Wake-Up Light to show the display menu. You will see the menu
buttons.
Press the Wake-up/Alarm icon to start setting a wake-up profile.
Note: Press and hold the alarm button for 1 second to deactivate all set
alarms at once.
You can set two different wake-up profiles. For each profile you can set
the alarm time, the light intensity, the wake-up curve duration, and the
type of wake-up sound and its volume.
Note: The set alarm will automatically go off at the same time every day
until you deactivate the alarm by first pressing the alarm toggle icon
and then the deactivate alarm icon
The lamp of the appliance simulates a sunrise. Like a sunrise, the
brightness of the lamp increases gradually. During this wake-up curve, the
color of the light changes from soft red to warm orange to bright yellow.
Press icon on the display to choose one of the 25 light intensity levels.
Note: The main display of the appliance shows if the alarm has been set.
Press this icon to open the menu.
to deactivate the alarm.
English
11