Demo Mode; Using The Appliance - Philips goLITE BLU HF3320 Mode D'emploi

ENGLISH
14

Demo mode

The demo mode is used to demonstrate the goLITE BLU energy light in
shops. When the appliance is switched on in demo mode, customers of
the shop can:
- adjust the light intensity
- switch the appliance on and off
- set the treatment time
If the appliance is not operated for 3 minutes, it reverts to its demo
mode default settings.
To activate the demo mode:
1 Insert the appliance plug into socket on the appliance (1) and put
the adapter in the wall socket (2) (Fig. 6).
2 Simultaneously press and hold the on/off button and the light
intensity button for 3 seconds (Fig. 8).
The appliance switches on and the segments of the timer indicator
,
go on and off in a rotating pattern.
The LED panel goes on at the low light intensity level.
,
Note: The appliance remains switched on in demo mode for 10 hours or until
it you deactivate the demo mode or unplug the appliance.
To deactivate the demo mode, simultaneously press and hold the on/off
button and the light intensity button for 3 seconds again.

Using the appliance

1 Insert the appliance plug into socket on the appliance (1) and put
the adapter in the wall socket (2) (Fig. 6).
2 Press the on/off button briefly to switch on the appliance (Fig. 9).
The first segment of the timer indicator goes on and flashes for 3
,
seconds (Fig. 10).
Note: The timer is automatically set to 15 minutes.
When the timer indicator stops flashing, the LED panel goes on and
,
the timer starts counting down the set time (Fig. 11).