NSK VIVA MATE G5 Mode D'emploi page 4

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 47
CAUTION
Dental Hygienists in dental clinics, other medical premises including hospitals, and home visits.
Always use the genuine AC adaptor. A non-genuine AC adaptor may result in a failure.
performed, it may cause heating.
handpiece. If the motor is rotating, you may get injured by the bur, or the connecting portion of the
handpiece may be damaged, resulting in an injury or a failure.
Do not direct the handpiece or its lighting directly at the eye of the patient or the operator. Doing so may
damage eyes.
Do not short-circuit the connector terminals of the battery pack. Do not carry or store the battery pack
excessive electric current may cause heat or smoke contamination, rupture or fire. It may also cause the
heating of metal objects, such as wires, necklaces and hair pins.
Do not allow any impact on to the product. Do not drop the product. Personal injury or damage to the
product may result.
method and maintenance.
Do not lubricate the motor. Doing so will cause heating and a failure.
should be free from dust, salt and sulphur.
cloth and finally wipe clean thoroughly with a dry cloth.
Do not disconnect the motor cord from the micromotor.
device emitting such waves, do not use this product in its vicinity. If an ultrasonic generator or an electric
use is necessary, this product should be observed to verify normal operation in the configuration in which
it will be used.
Check for vibration, noise and overheating outside the patient's mouth before use. If any abnormalities are
found stop using immediately and contact your dealer.
Do not use or leave the product in a high-temperature environment such as under strong direct sunlight, in
the internal circuit.
Continuous use of this product over a long period of time may overheat the motor and the handpiece and
result in an accident.
case, stop using it and wait till it cools down before resuming.
3

Publicité

Table des Matières
loading

Table des Matières