NSK VIVA MATE G5 Mode D'emploi page 13

4-4 Setting the rotation direction
been selected, the Rotation Direction Key lamp is lighted.
NOTICE Rotation direction can be changed when the motor is rotating.
direction starts softly.
4-5 Setting the luminance of the lighting
4) Select the luminance using the Rotation Speed Selection Key (
1 Hi mode (bright)
NOTICE
4-6 Operation
4-7 Auto-cruise function (Foot Control operation only)
on the control unit to start auto-cruise mode. Auto-cruise mode is indicated by the flashing of the dot on the
right bottom corner in the Speed Display. In auto-cruise mode, the rotation and the set speed are maintained
Control again.
hot. In such a case, stop using it and wait till it cools down before resuming.
CAUTION
4-8 Auto Power Off Function
consumption. (Auto Power Off function)
NOTICE
operated.
).