Functions; Charging A Battery - Raleigh PEDELEC IMPULSE EVO Notice Originale

Charger type 2
Battery voltage
AC input voltage
Frequency
Max. DC output voltage
Max. charge current
Dimensions ( L | W | H )
Permitted ambient temperature
range during charging
Storage temperature
Recommended storage
temperature
Weight
Protection class
Charger connected to
power supply
| green LED flashes
Battery being charged
| green LED flashes
Fully charged
| green LED continually ON
!
Charging fault
| red LED flashes
Description of
charging indicator
36 V
230 - 240 V
50 - 60 Hz
42 V
4 A
206 mm | 94 mm | 61 mm
0 to +40 ˚C
-10 to +50 ˚C
18 to 23 ˚C
753 g
The charger is only intended to be used
indoors. Keep the charger away from rain
and moisture. Water penetrating into the
charger poses a risk of electric shock.
Power cable
Charging cable
LEDs
Mains connector
The charging display symbols can vary. If you are not sure
what the symbols mean, contact your cycle dealer.
10.3

Functions

10.3.1 Charging a battery

DANGER
Read and follow the information on the charger specification plate,
otherwise there is a risk of misuse resulting in serious injuries.
Damaged batteries must not be charged.
The battery can remain on the pedelec during the charging
process. It can also be removed and charged elsewhere.
Charging the battery with charger type 1
1. Remove the protective cap on the battery.
2. Connect the charger plug to the battery (it clicks into place).
3. Insert the mains plug into a power socket.
Original User Guide | Pedelec Impulse Evo / Impulse Evo Next Version 4 EN-93