Protection Class - Raleigh PEDELEC IMPULSE EVO Notice Originale

WARNING
Keep battery chargers away from sparks and fires. It can explode
causing severe burns and fires. Further consequences can include
malfunctions and a reduced service life. Ensure there is adequate
ventilation for charging.
IMPORTANT
The mains voltage must match the supply voltage of the battery
charger, otherwise there is a risk of damage to the device. The supply
voltage for the charger is specified on the label on the back of the
device.
Do not charge batteries for a long period if they are already fully
charged or are not being used. Electrical storms, voltage fluctuations
and short circuits can damage the battery.
Keep the battery charger clean. If the contacts are dirty, the dirt can
burn during charging, leaving burn marks. The charger may need to be
replaced in such cases  10.4.1 Cleaning Page
EN-92 Original User Guide | Pedelec Impulse Evo / Impulse Evo Next Version 4
EN-95.
10.2 Technical details
Charger type 1
Battery voltage
AC input voltage
Frequency
Max. DC output voltage
Max. charge current
Dimensions ( L | W | H )
Permitted ambient temperature
range during charging
Storage temperature
Recommended storage
temperature
Weight

Protection class

Charger cable
36 V
230- 240 V
50 - 60 Hz
42 V
4 A
175 mm | 82 mm | 47 mm
0 to +40 ˚C
-10 to +50 ˚C
18 to 23 ˚C
720 g
The charger is only intended to be used
indoors. Keep the charger away from rain
and moisture. Water penetrating into the
charger poses a risk of electric shock.
Power cable