Table des Matières
Publicité
1 - PRINCIPLE.
DATA OUT OPTION (ON THE LIGHTING UNIT).
By - pass
Booster
DATA
IN
2 - LINK USE.
CONNECTIONS
To install the DATA line, daisy chain all units.
You can not make a star configuration. In this case - use a specific DATA splitter.
20
robert juliat
Route de Beaumont F 60530 Fresnoy-en-Thelle phone: 33 (0)3.44.26.51.89 - fax: 33 (0)3.44.26.90.79 - www.robertjuliat.fr
2500W HMI FOLLOW SPOT
NETWORK USE
DIGITAL
DATA
OUT
Output
Dimmer
a
d
b
c
IN
OUT
TECHNICAL FILE
(DMX - AVAB)
- The DATA goes to the connector DATA IN on the
CAD 900 ( a ) .
- The signal is present on the DATA output of the
lighting unit.
- When the lighting unit is in use, there are two
possiblities for the output - DATA OUT :
1 : Booster on - The signal passes by an amp.
2 : Booster off - The signal passes on direct on
the output.
( Refer to User's manual CAD 900 - page 11 ).
- When the lighting unit is not in use ( power supply
off ), the DATA is still present on DATA output.
IN
1039B & 1439B
VALID SINCE : 09.05.01
Output
Dimmer
a
d
b
c
OUT
etc.
Publicité
Table des Matières
