Guarantee
This product is guaranteed for 3 years.
Disposal
Your new appliance was protected in
transit by the materials it was packed
in. All of the materials used are envi-
ronmentally friendly and re-usable.
Please help to make a contribution by dispo-
sing of the packing responsibly. Your dealer
or your local recycling facility will be able to
inform you about the available disposal me-
thods.
Do not allow children to play with
the packing or parts of it. Risk of
suffocation from foil and other pa-
cking materials.
Faults and resolving problems
Repairs to electrical appliances may only be
the manufacturer.
Incorrect repairs may expose the user to sub-
stantial dangers and cause damage to the
Problem/display
indication
Appliance does not
function/No display
E05
Appliance switches
off of its own ac-
cord
If faults continue to be indicated after waiting for a considerable time and switching the ap-
pliance off and on again, the appliance must be sent back to Customer Service for examinati-
on.
28
Cause and remedy
Mains power not connected -> Plug in mains plug, use different power socket if
necessary
Circuit-breaker switched off -> Switch on circuit-breaker
Overheat cut-out
If the display shows the fault code "E05" this means that the overheat cut-out
has tripped to protect the appliance and the cookware. It is automatically trig-
gered if you have selected Power mode and the temperature exceeds 270°C.
You can reset the overheat cut-out by unplugging the appliance from the
mains, after which the appliance can be used as normal again.
Timer function was active, timer indicator on display (8) is lit
This symbol on the product or its
packing indicates that the product
should not be disposed of as nor-
mal household waste but instead
taken to a recycling facility for
electrical and electronic appliances. You can
obtain further details from your local authori-
ty, the municipal recycling services or the re-
tailer from whom you purchased the appli-
ance.
appliance. If the electronic circuitry of the ap-
pliance detects a fault, the following infor-
mation is displayed: