Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION INTERNAL BLOWER
NOTE: The following instructions are for
installing the internal blower only.
Install this range hood only with internal
blower model CBI-290A, CBI-600A or PBI-1100A
1. Choose blower ducting outlet. Duct options are from
top, side or front. FIG. 13
2. Remove knockout plate for only one chosen duct
outlet position. FIG. 14
3. Attach internal blower plate to CBI blower by (4) M4
x 16 mm screws provided with CBI blower. FIG. 15
4. Install internal blower with blower plate into hood
body. Bottom of blower plate hooks into body tabs.
Top of blower plate attaches by (2) 3/16 x 1/2" screws.
FIG. 16
FIG.14
Blower Plate Rests on Hook
- 19 -
FIG.13
FIG.15
FIG.16
Publicité
Chapitres
Table des Matières
