Table 6 - Recommended separation distances between portable and mobile RF communication
equipment and the
The
SLENDERTONE CONNECT ABS
which radiated RF disturbances are controlled. The customer or the user of the
Bluetooth
Radio Module can help prevent electromagnetic interference by maintaining a minimum distance between portable
®
and mobile RF communications equipment (transmitters) and the
Module as recommended below, according to the maximum output power of the communications equipment.
Rated maximum output
power of transmitter
W
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in metres (m)
can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output power
rating of the transmitter in watts (w) according to the transmitter manufacturer.
NOTE 1:
At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2:
These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
EU Only
• Wireless communication equipment such as wireless home network devices, mobile phones (other than your own),
cordless telephones, base stations and walkie-talkies of between 1W to 10W can affect this equipment and should
be kept a distance of least 2.3 to 7.3 metres away from the device.
SLENDERTONE CONNECT ABS
9 containing a Bluetooth
Radio Module is intended for use in an electromagnetic environment in
®
Separation distance according to frequency of transmitter
150 KHz to 80 MHz
d = 1.17 √ P
0.12
0.37
1.17
3.70
11.70
9 containing Bluetooth
Radio Module.
®
SLENDERTONE CONNECT ABS
9 containing a Bluetooth
SLENDERTONE CONNECT ABS
m
80 MHz to 800 MHz
d = 1.17 √ P
0.12
0.37
1.17
3.70
11.70
9 containing a
Radio
®
800 MHz to 2.5 GHz
d = 2.33 √ P
0.23
0.75
2.33
7.36
23.50
23