Technical Specifications - Slendertone Connect Abs 9 Mode D'emploi

Technical Specifications

Product Type: 570
Intended use: Abdominal muscle stimulator
Classification:
• Internally powered equipment, Type BF applied parts.
• This product is intended for continuous operation. i.e. operation in normal use, for an unlimited period of time,
without the specified limits of temperature being exceeded.
• This product is not suitable for use in an oxygen-rich environment.
• This product is not suitable for sterilisation.
• Protected against ingress of water, as per IP22.
Waveform: Symmetrical bi-phasic pulse waveform when measured into a resistive load.
Note:
• The signal gradually increases to a peak intensity level at the start of the contraction phase (i.e. ramp up) and
gradually decreases to nothing at the start of the relaxation phase (i.e. ramp down). When a GelPad contact
problem is detected, the signal ceases.
Environmental Specifications:
Operating Range:
Transport & Storage Range:
The Output Frequency indicates the number of pulses per second transmitted by the controller. This is measured in
hertz, which is indicated by Hz".
Output (RMSA) means the maximum output root mean square current for each channel.
Output (RMSV) means the maximum output root mean square voltage for each channel.
Temperature: 5 to 40˚C
Humidity: 15 to 93 % RH (non condensing)
Atmospheric Pressure: 70 to 106kPa
Temperature: -25 to +70˚ C
Humidity: 10 to 93% RH (non condensing)
Atmospheric Pressure: 50-106kPa
17