Slendertone Connect Abs 9 Mode D'emploi page 19

This symbol means that this device emits nonionising radiation. All devices and systems that include RF
transmitters or that intentionally apply RF electromagnetic energy must have a label with this symbol.
FCC/IC transmitter declaration:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. This device complies with Industry Canada license-exempt RSSs.
Rated Outputs / Voltage/Currents: Type 570
The electrical output of the
program. The program loaded at manufacture is described as "Essential Toning" and delivers the following output:
Parameter
Waveform type Symmetric, biphasic, constant current controlled
Peak Output Current (user adjustable)
Peak Output Voltage
Output Frequency range
Phase Duration
DC Component
The
SLENDERTONE CONNECT
parameter selections. The following table gives the limits of these parameters. All
programs are within these limits.
Parameter
Waveform type Symmetric, biphasic, constant current controlled
Peak Output Current (user adjustable)
Peak Output Voltage
Output Frequency range
Phase Duration
DC Component
The parameters of each program can be viewed on the app. The maximum power per channel into a 500! load is
180mW.
SLENDERTONE CONNECT ABS
app allows you to select from range of other NMES programs, each having different
9 depends on the parameter settings of the active NMES
500!
0 - 75 mA
0 - 38V
60 - 70 Hz
250 -300 µS
none
500!
0 - 80 mA
0 - 40V
10 - 80 Hz
100µS - 400 µS
none
1K!
0 - 70mA
0 - 70 V
60 - 70 Hz
250 - 300 µS
none
SLENDERTONE CONNECT ABS
1K!
0 - 70mA
0 - 70V
20 - 80 Hz
200µS - 400 µS
none
9
19