Heatshift™ Function - Thermador Masterpiece Serie Manuel D'utilisation

Setting procedure
Select the appropriate temperature setting from the table.
Place the empty cookware on the cooking zone.
Select the cooking zone. Touch COOK SMART.
1.
lights up in the cooking zone display.
Within the next 10 seconds, select the required
2.
temperature setting from the settings range.
The function has now been activated.
The temperature symbol flashes until the frying
é
temperature is reached. A signal sounds and the
temperature symbol goes out.
Once the frying temperature has been reached, add
3.
the fat and then the food to the pan.
Note: Turn the food so that it does not burn.
Switching off CookSmart
Select the cooking zone and set it to
range. The cooking zone switches itself off and the
residual heat indicator appears.
®
. in the settings
‹ ‹
HeatShift™ function
This function activates the entire flexible cooking zone,
which is divided into three cooking areas and which has
preset power levels.
é
Only use one item of cookware. The size of the cooking
area depends on the cookware used and whether it is
positioned correctly.
Cooking areas
This means that an item of cookware can be moved
during the cooking process to another cooking area with
another power level:
Preset power levels:
Front area = power level
Middle area = power level
Rear area = power level
The preset power levels can be changed independently
of one another. You can find out how to change these in
the section on ~ "Basic settings"
Notes
If more than one item of cookware is detected on the
▯
flexible cooking zone, the function is deactivated.
If the cookware is moved within the flexible cooking
▯
zone or lifted up, the cooktop automatically starts
searching and the power level of the area in which the
cookware was detected is set.
You can find information on the size and positioning of
▯
the cookware in the section on the function.
Š
†
‚ . †
21