Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Replacing FUSE follow below steps:
1. Disconnect the test lead probe from measuring
circuit.
2. Turn the Meter to OFF position and remove the
holster.
3. Remove the screws from the enclosure and open
the enclosure.
4. Remove the broken fuse and replace with new
specified fuse.
5. Put the enclosure back and re-fasten the screw.
Fuse:
mA /μA input:
F1 fuse, 0.5A H 660V fast-fuse, 6.3x32mm
10 A input:
F2 fuse, 10A H 660V fast-fuse, 6.3x32mm
F1
F2
16
Publicité
Chapitres
Table des Matières
