Power Linking; Replacing The Fuse; Dmx Linking; Dmx Connection - Chauvet Professional ROGUE R2 SPOT Guide De Référence Rapide

Rogue R2 Spot QRG
AC Power

Power Linking

AC Plug

Replacing The Fuse

DMX Linking

DMX Connection

This product has an auto-ranging power supply that can work with an input voltage
range of 100–240 VAC, 50/60 Hz.
To eliminate unnecessary wear and improve its lifespan, during periods of
non-use completely disconnect the product from power via breaker or by
unplugging it.
You can link up to 5 Rogue R2 Spot products at 120 V, 8 products at 208 V, or 9
products at 230 V. Never exceed this number. Power linking cords can be
purchased separately.
Connection
AC Live
AC Neutral
AC Ground
1. Disconnect this product from power.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove blown fuse and replace with a good fuse of the same type and rating.
4. Screw the fuse holder cap back in place and reconnect power.
The Rogue R2 Spot will work with a DMX controller using a 3- or 5-pin DMX
data connection. A DMX Primer is available from www.chauvetprofessional.com.
The Rogue R2 Spot uses a 3- or 5-pin DMX data connection for its DMX
personalities: 18CH and 21CH. See the User Manual for information about
connecting and configuring the product for DMX operation.
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow Green/Yellow
3
Screw Color
Brown Yellow/Brass
Blue Silver
Green
EN