Other Functions; Automatic Restart; Airflow Angle Adjustment - CLIVET CRISTALLO IM1-XY Serie Manuel D'instructions Pour L'installation, L'utilisation Et L'entretien

Use
3.4.1

Other functions

– Automatic restart

If the power supply to the unit is interrupted, the
unit will automatically restart with the last settings
when it is restored.
– WiFi Control
WiFi control allows you to control the air
conditioner through your mobile phone and a
wireless connection.
– Memory of the ventilation louvers angle
When the unit is turned on, the ventilation louvers
automatically return to the last set angle.
– Detection of refrigerant leaks
The indoor unit automatically displays "EC" when it
detects a refrigerant leak.
l
WARNING
For a detailed explanation of the unit's
advanced features (such as TURBO mode and
self-cleaning functions), refer to the Remote
Control Manual.
3.4.2

Airflow angle adjustment

ADJUSTING THE VERTICAL AIR FLOW ANGLE
With the unit turned on, use
direction (vertical angle).
1 Press the button once to activate the ventilation
louver. Each time the button is pressed, the louver
is tilted by 6°. Press the button until you reach the
desired direction.
2 To swing the ventilation louver continuously, press
and hold the button for 3 seconds. Press it again
to stop the automatic function.
Adjustment
range
l
WARNING
In Cooling or Dehumidifying mode, do not
leave the ventilation louver at an angle that
is too vertical for a prolonged period. In this
position condensation may form on the louver
flap, which may then fall on the floor and
furniture (see "Fig. 21").
In Cooling or Heating mode, adjustment of the
ventilation slot to an angle that is too vertical
may reduce the performance of the unit due to
restricted airflow.
d
IT IS PROHIBITED TO
adjust the air vents with your hands, because
doing so could alter the synchronism. In this
case, turn off the unit and disconnect it from the
power mains for a few seconds, then restart
the air conditioner. The air vent will reset.
button to adjust airflow
Fig. 21
23