Hbgb Countertop Cutout Chart - Hatco HBG Série Manuel D'installation Et D'utilisation

INSTALLATION
NOTICE
Do not modify wiring or cut thermostat capillary on control
box to increase-remote mounting distance. Cutting
the thermostat capillary will cause the unit to overheat
and may damage the unit as well as the surrounding
countertop.
NOTE: The remote-mounted control box should be mounted
using screws with a 1/4" (6 mm) minimum diameter
screw head inserted through the keyholes located on
the mounting brackets. The control box is to be readily
removable, not permanently mounted.

HBGB Countertop Cutout Chart

Model
HBGB-2418
HBGB-3018
HBGB-3618
HBGB-4818
HBGB-6018
HBGB-7218
Width
24-5/8" (625 mm) — 24-7/8" (632 mm)
30-5/8" (778 mm) — 30-7/8" (784 mm)
36-5/8" (930 mm) — 36-7/8" (936 mm)
48-5/8" (1235 mm) — 48-7/8" (1241 mm)
60-5/8" (1540 mm) — 60-7/8" (1546 mm)
72-5/8" (1845 mm) — 72-7/8" (1851 mm)
Trim Mounting Ring
Metallic
Countertop
8. Once all components are secured, proceed to the
Operation section.
NOTE: A 6' (1829 mm) cord is supplied with this unit. Excess
cord should be routed neatly so it does not hang down.
Do NOT cut cord, any modification to the cord voids
warranty.
18-5/8" (473 mm) — 18-7/8" (480 mm)
18-5/8" (473 mm) — 18-7/8" (480 mm)
18-5/8" (473 mm) — 18-7/8" (480 mm)
18-5/8" (473 mm) — 18-7/8" (480 mm)
18-5/8" (473 mm) — 18-7/8" (480 mm)
18-5/8" (473 mm) — 18-7/8" (480 mm)
Apply a bead of NSF-approved
countertop and trim mounting ring.
Sealant must be rated for use at
HBGB Built-In Installation
8
Depth
sealant between the metallic
a minimum temperature of
250°F (121°C).
Form No. HBGM-0120
English