Warranty Clauses; Disposal; Technical Data; Scope Of Supply - Sentiotec WC4-SB-D Manuel De Montage Et D'utilisation

6

Warranty clauses

ABATEC Products GmbH is convinced of the quality of its products and we want you to benefit from this in fu-
ture. We therefore offer a 5-year warranty on products for domestic use and a 2-year warranty on products for
industrial use. The pre-requisites for this warranty are that:
• the control devices have been installed by an authorised specialist company;
• the devices are operated in accordance with the ABATEC operating instructions;
• the warranty claim is received by ABATEC within the warranty period.
The following are excluded from the warranty:
Defects or damage which have occurred due to use otherwise than as intended.
The warranty period begins when the product is invoiced by the cabin manufacturer.
Presentation of the original invoice is a pre-requisite for this.
The warranty period is neither extended nor renewed by work done under warranty.
If your device is defective, return it to your sauna retailer.
Modifications undertaken without the explicit consent of the manufacturer will invalidate the warranty.
7

Disposal

Please dispose of packaging materials in accordance with the applicable disposal regulations.
Used devices contain reusable materials. Therefore please do not simply take used devices to the nearest was-
te disposal site, instead ask your local council about recycling facilities.
8

Technical data

Dimensions of operating unit:
Dimensions of power unit:
Power supply:
Power consumption:
Switching capacity:
Environmental conditions:
The switch box does not have excess temperature protection (= safety temperature limiter, STL). Only
intrinsically safe devices may be operated on the switch box.
9

Scope of supply

Operating unit with connection cable
Power unit
Installation material
Operating instructions
WE DO IT FIRST.
Installation and usage instructions
L x B x H. 32 x 92 x 10mm
L x B x H: 100 x 100 x 56mm
230Vac / 50Hz
Max. 1,5W
230Vac / 16A ohmic load (AC1)
0-50°C, max.95% rel. humidity, non-condensing
p. 8/10